Thursday, August 4, 2011

Missy Layout Kit 10

Hi! Thankyou for purchasing one of our kits. Following are the step-by-step instructions you will need to complete this layout. Enjoy!

Please note: Some of the papers in your kit may differ from the ones shown.

  1. Cut a 9 inch square out of the large floral paper, distress around the edges and adhere on a slight angle in the middle of  the blue background paper. Optional: You can sew around the edges with a sewing machine or handstitch.
  2. Distress around the edges of the back ground paper.
  3. Cut a 12 x4 inch piece of the small pink floral paper and on the right hand side use a border punch, distress around the edges, then adhere it into place on top of the 9 inch square towards the bottom, (see photo) and sew around the edges.
  4. Using the border punch cut out two strips of the spotty paper, about 11 inches long, you need the strips to over lap, so make one wider than the other, distress around the edges, then mount one on top of the other using mounting tape, then adhere using tape on top of the 12x4 paper. (see photos).
  5. Wrap a piece of lace trim around the layout and tie with a bow.
  6. Mount your photo onto paper, distress around the edges, add pearl stripes around photo and adhere to the layout on the left hand side, move bow so it sits on the right hand side of the photo, ( I used tape and mounting tape so it was raised up a little).
  7. Cut the doily in half and sew/glue it to the left hand side of your photo.
  8. Colour in your teapot set and the top of the rose using markers, then go around the edges with white paint or gesso and finish using dimensional magic on the dots and the rose top, leave to dry.
  9. Cover the bottom of the rose with paper, cut and file or sand around the edges, adhere rose top on top when dry and adhere on the left hand side of photo using mounting tape.
  10. Adhere the teapot set using mounting tape on the right hand side of photo and add the resin flower, (see photos).
  11. Rip part of the back ground paper at the right hand top and add part of the doily to the back, then adhere a piece of paper to the back of the doily.
  12. Making the flags fold a piece of paper and cut it into a flag shape, distress edges, (you can use your finger nails for this) sew/glue down the folded edge leaving room for the pin, place pin inside flag and stick into the mounting tape behind the rose.
  13. Add title and journaling if desired.
 




Thanks and have fun scrapping!

No comments:

Post a Comment